philvia
New member
Not as much as California, due to the staggering dependence on automobiles and the pollution they emit.
why do you think that?
the NE is home to the most heavily populated area in the US and it already supports rail culture.
Not as much as California, due to the staggering dependence on automobiles and the pollution they emit.
Correct. HSR is mature technology and is stretched to its limits to make these speeds. This is due to running on a technology that was invented centuries ago. Steel Rails. Mag-lev is still in its infancy, and will run regularly at 500km/h in its first iterations.Highest Test Speeds are obtained on brand new tracks/guideways where certain safety trip features are turned off.
Yes, which are much faster than the average speeds of HSR in commercial operation today. Shanghai Mag-lev have run 501km/h during commercial runs. I don't know ANY high-speed rail that has done that. The French run was a specialized case.While it is true that the distance between Las Vegas and Los Angeles is much longer than test tracks and guideways in operations, and that the average MagLev speeds may eventually be higher than what I posted earlier, the fact remains these are the top and average speeds of what exists in commercial operation today.
HSR isn't off-the-shelf, either.I don't think Congress and State Legislatures are going to approve spending $Billions on systems that aren't commercial, "off-the-shelf" equipment and technology.
This is where Mag-lev really shines. Its faster acceleration will enable it to get up to speed in rural areas much more quickly, increasing the average speed overall.Even California's proposed HSR train will not be traveling at 250 mph until it reaches the rural areas of the Valley. Likewise, neither will MagLev vehicles. Anything moving that fast is going to make a lot of noise. You can count on speeds on both vehicle choices will be reduced in urban and suburban areas.
Interestingly, the Japanese Mag-lev has the possibility of running on regular HSR rails, with the addition of magnetic side-panels on the HSR tracks. This has the added benefit that it will be able to be easily converted to standard high-speed rail if need be.California is going to have to build new tunnels and tracks for the HSR train through the mountains north of L.A. If MegLev is chosen for L.A. to L.V. more new tunnels and guideways will have to be built through the same mountains. At least HSR trains on both corridors, to S.F. and L.V. can use the same tunnels and tracks through the mountains. That alone will save taxpayers $Billions.
And that's my major point.
My second point is that the time savings isn't going to be worth the extra expense. There will be station stops along the way, slowing either technology down. There will be environmental concerns along the route that will slow either technology down. Neither will travel at the absolute fastest test speeds. At some point in speed, wind resistance gets too high for commercial economical operations.
Your average top speed in many cases will be no better than conventional high speed rail because you need the right track geometries. Turns or gradients will quickly slow you down and give you no better performance than standard rail.
why do you think that?
the NE is home to the most heavily populated area in the US and it already supports rail culture.
Given that the HSR in California will be built to a 6000m radius, this won't be a problem. Japan's Shinkansen currently runs 4000m radius on its highest speed line. Its Mag-lev will be built to 8000m.
BUT, even if it were an issue...
where:
Train A = HSR
Train B = Mag-Lev :
Train A enters a 1500m curve at the curve's max speed of 150mph.
Train B enters a 1500m curve at the curve's max speed of 150mph.
Train A takes 10 minutes to resume cruising speed.
Train B takes 2 minutes to resume cruising speed.
(numbers are made up, but you can see where I'm going with this)
If there's another curve a few minutes down the road, HSR won't even GET to its cruising speed.
In other words, the more frequently the track forces the train to slow down, the greater advantage that Mag-lev has (within reason, we're obviously not talking about twisting canyon tracks.)
Of course, in reality, you built the track with as wide curves as possible.
Most of the curves will be in city limits anyhow, which will have limited speed due to noise restrictions.
Mag-lev is generally quieter, so in urban areas, the mag-lev would likely be able to travel at higher speeds.
Your average top speed in many cases will be no better than conventional high speed rail because you need the right track geometries. Turns or gradients will quickly slow you down and give you no better performance than standard rail.
sourceAcceleration has been improved too. The N700 benefits from a 30% increase in acceleration performance and now meets the acceleration standards of commuter trains – at 2.6km/h/s – reducing the amount of time needed to reach maximum speed. In service the trains will be permitted to travel at a maximum speed of 270km/h on the Tokaido Shinkansen and 300km/h on the Sanyo Shinkansen.
Ok I haven't read any comments on here, but I know some people don't like Maglev because it doesn't go as fast on curves. Well, The trip from L.A to Las Vegas doesn't have many curves, correct?