PITTSBURGH | Development Rundown II - Page 518

themaguffin · #**10341** Posted **Nov 24, 2014, 4:22 PM**

terrible, just terrible. would rather the surface lots.

photoLith · #**10342** Posted **Nov 24, 2014, 4:23 PM**

Let down again YAY, so a gigantic 5 story building is being built and those historic facades are being destroyed by Point Park; all around great news in the past week. So, wheres this rendering anyways?

Urbana · #**10343** Posted **Nov 24, 2014, 4:30 PM**

Rendering:

http://www.post-gazette.com/local/city/2...ena-site-Pittsburgh/stories/201411240165

AaronPGH · #**10344** Posted **Nov 24, 2014, 4:30 PM**

sigh

glowrock · #**10345** Posted **Nov 24, 2014, 4:35 PM**

It's —.

Austinlee · #**10346** Posted **Nov 24, 2014, 4:39 PM**

Quote:

Originally Posted by Urbana

Rendering:

http://www.post-gazette.com/local/city/2...ena-site-Pittsburgh/stories/201411240165

pghaedesign · #**10347** Posted **Nov 24, 2014, 4:39 PM**

So, basically they are moving into a building similar to Alcoa's move to the north shore. Boo. I lied it doesn't look as nice as Alcoa

eschaton · #**10348** Posted **Nov 24, 2014, 4:41 PM**

Confirmed at 5 stories, 268,000 square feet.

That means it's 53,600 feet per floor roughly - 1.23 acres per floor. Slightly larger floor plates than the UMPC building.

Given the pictures, my guess is the building will stretch from Centre to Wylie, with the bend following the planned cross street. I think there'll be a big useless patch of green space in the front too.

Urbana · #**10349** Posted **Nov 24, 2014, 4:43 PM**

There was not even an architectural firm hired. It was designed by the development company. This is a really sad effort.

I would have preferred them to have moved out by the airport rather than waste the site with their Southpointe —.

Private D · #**10350** Posted **Nov 24, 2014, 4:52 PM**

Well... I was excited to hear the news last night, but unfortunately what I said a few months ago on here was once again confirmed... We just have to resign ourselves to the fact that Pittsburgh just cannot get good design.

Minivan Werner · #**10351** Posted **Nov 24, 2014, 5:01 PM**

Wow... from a 70 story HQ to 5. Very disappointing.

Private D · #**10352** Posted **Nov 24, 2014, 5:12 PM**

70 story to 5 pretty much illustrates the crumbling of US Steel over the years. It's not even a top 10 global steel producer anymore and has certainly lost clout on Wall St. Even so, I thought that they could do better than a low rise suburban office park. I would rather they built out by the airport.

This is truly an embarrassment for Pittsburgh.

markson33 · #**10353** Posted **Nov 24, 2014, 5:13 PM**

While the height is disappointing I could live with it if the architecture wasn't so bland. This says nothing about US Steel as a company! Alcoa at least created a landmark type structure. Where is the steel? This could just be a random suburban office building.

Austinlee · #**10354** Posted **Nov 24, 2014, 5:21 PM**

Quote:

Originally Posted by eschaton

Confirmed at 5 stories, 268,000 square feet.

That means it's 53,600 feet per floor roughly - 1.23 acres per floor. Slightly larger floor plates than the UMPC building.

Given the pictures, my guess is the building will stretch from Centre to Wylie, with the bend following the planned cross street. I think there'll be a big useless patch of green space in the front too.

Quote:

Originally Posted by markson33

While the height is disappointing I could live with it if the architecture wasn't so bland. This says nothing about US Steel as a company! Alcoa at least created a landmark type structure. Where is the steel? This could just be a random suburban office building.

In all fairness, it probably will be a nice design when finished. Think Alcoa HQ. That is an architectural gem at only a few stories tall. Never shed any tears over the initial renderings.

summersm343 · #**10355** Posted **Nov 24, 2014, 5:22 PM**

Just sad. What a waste.

Gilamonster · #**10356** Posted **Nov 24, 2014, 5:24 PM**

Raise your hand if you thought that when the Civic Arena was razed, there wouldn't be a single building built on the cleared land that would be taller than it.

Minivan Werner · #**10357** Posted **Nov 24, 2014, 5:36 PM**

I don't see why they can't just be the anchor tennant in a building with double the square footing. Lease it to other companies or expand as needed. Based on their number of employees currently in the Steel Building, they're also going to be doing some serious downsizing.

Urbana · #**10358** Posted **Nov 24, 2014, 5:39 PM**

Quote:

Originally Posted by Austinlee

In all fairness, it probably will be a nice design when finished. Think Alcoa HQ. That is an architectural gem at only a few stories tall. Never shed any tears over the initial renderings.

Construction is to begin in August. I would be willing to bet what we see is what we are getting.

TBone7281 · #**10359** Posted **Nov 24, 2014, 5:46 PM**

Quote:

Originally Posted by eschaton

Given the pictures, my guess is the building will stretch from Centre to Wylie, with the bend following the planned cross street. I think there'll be a big useless patch of green space in the front too.

Yeah, they showed that right before the press conference started... there was a view that showed the site and proposed building location that looked like it was on this block:

https://www.google.com/maps/dir/CONSOL+E...25713ab!2m2!1d-79.989657!2d40.439183!1m0

The building will stretch the entire block, but one side of it will be open with a green space.

I don't see any rendering on Clayco's website yet:
http://www.claycorp.com/

EDIT: Renderings here though... http://www.prnewswire.com/news-releases/...ew-headquarters-location-300000243.html#

Private D · #**10360** Posted **Nov 24, 2014, 5:50 PM**

Quote:

Originally Posted by markson33

While the height is disappointing I could live with it if the architecture wasn't so bland. This says nothing about US Steel as a company! Alcoa at least created a landmark type structure. Where is the steel? This could just be a random suburban office building.

It actually says everything about US Steel as a company...