Quote:
Originally Posted by fatscat
Can you clarify for us newbies to. zoning what "and F.A.R. of 3.5" as well as "SUD" means?
Thank you! 
|
S.U.D. in this case I meant single-unit dwelling. Normally I don't post demolition permits for those unless it is attached to a known project or on a main street. King Street is neither of these but the Centre-2 zoning it has allows for significant densification.
F.A.R. is floor-area-ratio. It's a number which you multiply by the lot size to get get the maximum allowed square footage of a new build. For example a F.A.R. of 8 means a high-rise is allowed once other rules like setbacks, and max tower dimensions are considered. Centre-2 zoning has the highest F.A.R. allowed in the Regional Centre.
For this site the lot is very small by itself. No larger than 3'000 sq ft so only 10'500 sq ft on new build is allowed. If you add the empty lot next door it is 6'000 sq ft so now 21'000 sq ft is allowed.
Across King Street a 18-19'000 sq ft lot has a 10-storey, 60-unit building planned. Scale that down by a third and this site could have a 4-storey, 16-unit building. Add in the lot to the north and 6-storey is achievable.
Also should be noted that Clifton Recycling which is directly behind 2652 King Street has long been rumoured to be owned by a development company and will be redeveloped in the near-future. I think there is a good chance that 2652 King, 2660 King, and Clifton Recycling is a single development block and this is only the first demolition permit to start the process.
PDF - Maximum Floor Area Ratio Precints (Regional Centre)
The F.A.R. of 8 at Shopper's (Robie @ Almon) is the one to watch in the coming years once they move the store into Richmond Yards.