stal̕əw̓asəm (Riverview) Bridge (Pattullo Bridge Replacement) | U/C

[SFUVancouver]

Originally Posted by CanSpice

Tell me you haven't driven over the Pattullo Bridge without telling me you haven't driven over the Pattullo Bridge.

It's a friggin hill, there's nowhere flat that you could do any of this for (other than the 5k run, but it'd be a punishment).

Touché. I probably took it annually, if that, when I lived in Vancouver.

[aberdeen5698]

Originally Posted by CanSpice

It's a friggin hill, there's nowhere flat that you could do any of this for (other than the 5k run, but it'd be a punishment).

They closed down the Burrard Street bridge for a dance party during the "Ride the Night" event a few years back before COVID...

[madog222]

Temporary support trusses are starting to go in for the upper crossbeam on the main tower.

[Alex Mackinnon]

Originally Posted by aberdeen5698

They closed down the Burrard Street bridge for a dance party during the "Ride the Night" event a few years back before COVID...

You can't forget Christy Clark's tone deaf yoga plans for Burrard as well.

[Klazu]

View from the air while landing to YVR.

[jollyburger]

Video walkthrough of the site:

• Video Link

[trofirhen]

Interesting that the concrete pylons (one yet to come, I believe) look so big and wide as if made to accommodate a roadbed of six lanes, maybe even more, although I understand it is to be four lanes only.

[madog222]

It is indeed being built to accommodate six lanes and is designed with just the single tower.

[Vantage]

Originally Posted by trofirhen

Interesting that the concrete pylons (one yet to come, I believe) look so big and wide as if made to accommodate a roadbed of six lanes, maybe even more, although I understand it is to be four lanes only.

The bridge will only have one pylon.

[trofirhen]

Originally Posted by madog222

It is indeed being built to accommodate six lanes and is designed with just the single tower.

Originally Posted by Vantage

The bridge will only have one pylon.

Thank you both for the clarification. I'm interested in what the final 'product' will be like. It will be good not to have to navigate the narrow, rickety Patullo anymore.

[Lexus]

2023, June 3

HWY 17 and Old Yale is already closed

Untitled by Lexus LX600, on Flickr

Untitled by Lexus LX600, on Flickr

Untitled by Lexus LX600, on Flickr

Untitled by Lexus LX600, on Flickr

[madog222]

• Video Link

[Lexus]

2023, June 18

New West side

IMG_2056 by Lexus LX600, on Flickr

IMG_2057 by Lexus LX600, on Flickr

Surrey side

IMG_2079 by Lexus LX600, on Flickr

[Lexus]

2023, June 24

IMG_2152 by Lexus LX600, on Flickr

[madog222]

36 hour concrete pour for the N1 pier cap starting tomorrow.

[jollyburger]

Starts at 6AM

[officedweller]

Originally Posted by madog222

36 hour concrete pour for the N1 pier cap starting tomorrow.

From Patullo Bridge Project twitter today:


With 15 piles fully installed at foundation N1, crews are now working on pouring the concrete pile cap at this site.
N1 is the second of 2 in-river bridge foundations and is located on the @New_Westminster side of the Fraser River.
https://twitter.com/pattulloproject/status/1674521890986008577

[Lexus]

2023, July 9

Surrey side:

Untitled by Lexus LX600, on Flickr

Untitled by Lexus LX600, on Flickr

Untitled by Lexus LX600, on Flickr

[madog222]

Here's last month's large pour.

On June 27th, concrete was poured continuously for 30 hours at N1, the in-river bridge foundation on the New Westminster side of the Fraser River.

Concrete is poured over rebar to create the pile cap. Once complete, columns to support the bridge deck will be constructed here.

[madog222]

Bridge deck girders will start to go in next week on the Surrey side. https://www.pattullobridgereplacement.ca...es-of-Highway-17-and-112-Avenue-Rev0.pdf