Quote:
Originally Posted by kool-ski
Some more tidbits I overlooked within the amended permit including additional commercial space and the increased GFA that should help with the height calculation (however that's done ):
ZONING PLAN (L&I PERMIT PRE-REQUISITE)
Dwelling Units (Each): 215 vs. 183
Building GFA (Square Feet): 353,226 vs. 257,694
Commercial Area (Square Feet): 30,180 vs. 20,201
Property Frontage (Linear Feet): 300
CDR Required (PCC 14-304(5)): Yes
|
whelp, based on nothing but this info and the originally posted info, here is what I calculate, assuming the same floor area and floor to floor height:
original: 257,694 sf / 49 floors = 5,259 sf per floor
current: 353,226 sf / 5,259 sf per floor =
67 floors
original: 567 feet / 49 floors = 11.6 feet floor to floor
current: 67 floors x 11.6 =
777 feet high
I don't know if those are valid assumptions, but if they are, this is pretty significant.
what I can't quite square is that there are only 32 additional units, over 18 additional floors. they must have changed the unit sizes, or added a new unit type.