Quote:
|
Quote:
Which, by the way, has a date been set for that? I'm still having trouble with the videos on the council website. |
Cool. But a bit surprised. Isn't that site historical. because I do see a Texas historical marker right out front.
|
I'm pretty sure (I'll probably go and check later tonight) that the historical marker refers to the Texas Press Association itself rather than the building, and if I'm not mistaken the TPA has indicated they're not opposed to moving from the site.
|
Quote:
|
I'd really like to see this building get built. Will make a great addition to the West End skyline.
|
It's going to be up for city council vote the 22nd.
http://m.bizjournals.com/austin/blog...-councils.html They are saying its 39 floors now but only 430 feet? |
Quote:
I assume one of the two (39-floors or 430' tall) is a typo or a misunderstanding by R. Grattan (the story's author). *If the building was proposed at 37-levels and 452' in height (or ~12.22'/level)...extrapolate that out to 39-levels and you arrive at ~476'. So, maybe Grattan meant to write 480' instead of 430'!?! |
This document from April 22, 2014 indicated 39 floors at 430 feet.
|
On p.27 of that document it shows the heights. The 430' number is at the top of the last residential floor, but does not include the top of the white section. That little part looks to be almost twice the height of the other floors. That could be the 452' number.
|
Regardless of the actual height, it bugs me that they couldn't add one more floor for an even 40.
|
Quote:
Page one mentions a 40-story building...followed by several references to a 39-story tower. Later, the elevations show a 37-story structure. Just a bit confusing, huh?!? |
Very.
|
There was a stacking plan in PDF format that someone posted back in February that showed the 452 foot height. Riverside Resources has since pulled the link, but I still have it saved. I'll email it to anyone who wants it. If you read my first post in this thread you'll see the (now dead) link with the heights mentioned.
The stacking plan showed the building to be 425 feet 10 1/2 inches to the main roof. The mechanical penthouse rises another 26 feet above that - so 451 feet 10 1/2 inches - or 452 feet if you round it up. It also showed the top floor (37th floor) to be 412 feet. Whether or not they've added any floors I don't know, but I would assume the 430 foot height is measuring it only to the main roof parapet. I've noticed that most of the time mechanical penthouses are exempt from height restrictions unless it's in a capitol view corridor. Anyway, with the 37-story version having a top floor of 412 feet, that gives you a number of 11.1351351351 per floor, so multiply that number by 39 and you get a top floor height of 434 feet. Assuming the other measurements above the top floor stay the same, that should make the building 22 feet taller for a total of 474 feet. By the way, if it really does have a top floor height of 434 feet, that would be level with the roof of Spring. |
The referendum was approved by Council Council yesterday...that is, Riverside Resources was granted the 20:1 FAR they requested.
|
This is a really nice one. You guys just wait, it's going to be beautiful. The fact that the renderings show so much of the building from different angles means they put a lot of thought into it. This will be a nice looking building from every side - not one of those "face buildings" and then the other side is meh.
|
I'm really excited about this one, it's gonna bring a lot of density with such a tall tower in such a small footprint, it's a great-looking tower, and it's set a precedent for similar-FAR buildings in the area, which will really fill in the Western skyline nicely. Even with the Bowie tower, Spring has kind of stuck out quite a bit, and even though this'll be East of Bowie, Spring, and the Monarch, it's really going to even things out.
|
Quote:
|
Somewhat of a shock that Morrison and Tavo didn't vote against it. Maybe both are starting to realize that urban density is the way to go.
|
|
All times are GMT. The time now is 1:35 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.